GRINDING OF PISTON RINGS
High temperatures, exhaust gases as well as mechanical stresses and other negative factors acting on piston rings during their normal work requires the use of precise manufacturing solutions during piston rings production. Undoubtedly grinding is the key process here.
ANDRE offers a number of solutions for piston rings producers. Thanks to many years of experience, we can offer high performance abrasive tools that achieve the required geometry parameters and desired surface quality.
THE RING GROOVE GRINDING
| TYPE 41 | TYPE 1
|
Examples of implemented abrasive tools in industry [*] |
|||
|
Type |
Dimensions [mm] |
Characteristics |
Speed [m/s] |
|
41 |
120x1,2x20 |
95A80Q8B693 |
80 |
|
41 |
120x2,4x20 |
95A80Q8B693 |
80 |
|
1 |
200x6x20 |
99A60K7VE01 |
35 |
[*] Ask the Sales Department about the full offer and available characteristics.
OUTER DIAMETER PROFILE GRINDING
| TYPE 1
|
Examples of implemented abrasive tools in industry [*] |
|||
|
Type |
Dimensions [mm] |
Characteristics |
Speed [m/s] |
|
1 |
600x30x305 |
99A100J/K7VE01 |
50 |
|
1 |
600x35x305 |
99A100J/K7VE01 |
50 |
|
1 |
600x45x305 |
99A100L7VE01 |
50 |
|
1 |
600x55x305 |
99A100L7VE01 |
50 |
[*] Ask the Sales Department about the full offer and available characteristics.
SUPERFINISHING
| TYPE 5410
|
Examples of implemented abrasive tools in industry [*] |
||
|
Type |
Dimensions [mm] |
Characteristics |
|
5410 |
13x14x100 |
99A320J8VTE10S |
|
5410 |
13x14x100 |
M320I8VTE35S |
[*] Ask the Sales Department about the full offer and available characteristics.
RING FACE GRINDING
| TYPE 35 | TYPE 36 | TYPE 3601
|
Examples of implemented abrasive tools in industry [*] |
|||
|
Type |
Dimensions [mm] |
Characteristics |
Speed [m/s] |
|
35 |
450x50x150 |
99C150H8VTC10PP |
35 |
|
36 |
750x40x350 |
98C180GB |
30 |
|
3601 |
660x55x50 |
98C36J/K9B549 |
30 |
|
3601 |
762x65x50 |
98C60K9B549 |
30 |
[*]Ask the Sales Department about the full offer and available characteristics.
